15230713671
AOCHENG
Product Center
产品类型：Seamless tee
产品型号：1/2”-24”
产品厚度：sch40/80 STD XS
扫一扫加微信详询
Three way carbon steel tee pipe fitting
The tees are pipe fittings and pipe connectors.Also called pipe fittings tee or tee, stainless steel equal diameter tee, tee joint, used in the main pipe to branch pipe.
The processing method of cold drawing tee fitting is: marking the tee where the pipe is to be processed and piercing the mark.
A tee is provided with three openings, that is, one entrance and two exits;Or a chemical pipe fitting with two entrances and one exit, in t-shape and Y-shape, with equal diameter pipe orifice or reducing pipe orifice, used at three converging points of same or different pipes.
The tee is a section of the main pipe plus a small branch pipe. Obviously, the two large sizes are the main pipe and the small size is the branch pipe.In a pure oxygen pipeline, there is usually pressure and oxygen is more active.If a cold-drawn tee is used, as long as the sundries in the pipe move along with the oxygen flow, the collision between sundries and the pipe may be caused due to the change in pipe diameter and flow velocity, or the electrostatic discharge generated due to the change in flow velocity may cause the fire of the pure oxygen pipe.
A jacking device, including metal, jacking device, commutator and bracket, shall be installed on the pipe;When the metal bar is heated and the metal bar is pushed out by jack and metal bar, the tube wall material will naturally turn out outward to form the cold-drawn tee blank;Then the pipe segments of certain length and corresponding specifications are welded on the blank of the cold-drawn tee formed by the ejecting to produce the final product.
202
沧州奥广机械设备有限公司
网站首页
电话咨询
联系我们
一键分享